Single Face Paper Corrugation Machine For Corrugated Board Manufacturing

LUM-280 Single Facer machine

Technical parameters:

Structural features:

1.Vacuum adsorption ,with a high-pressure blower.With wind control device machine suction silencer; electrical control box to focus on the same host ,not less than 1.5 m , the operating side of the closed side of the hood.

2.Gimble drive,Separation structure,Independent drive box,enclosed gear oil immersion type lubrication ,can prolong the life of the gearing.

3.Corrugated roller diameter Ø280mm,adopt 48CrMo high quality ally steel,after quenching and tempering, hardening, polished surface chrome plated hardness of HRC60 degrees, the cylinder control up and down .

4.Pressure roller diameter Ø280mm ,modulation processing with 4 carbon steel, machining and grinding off the surface chrome plated cylinder control up and down .

5.The upper and lower Preheat roll diameter Ø320mm, machining and grinding off the surface hard chrome plated, all metal hose connection.

6.Pneumatic control glue,glue roller diameter Ø215mm,engraved with the pit-style textured back surface polished, hard chrome plated, doctor roller surface grinding and hard chrome plating.

7.Corrugated roller bearings with high temperature and pressure grease lubricated bearings.

8.Corrugated roller unilateral high 0.10 mm, pressure roller unilateral high 0.075 mm. Add space limit control device, pressure cylinder for Ø 160 mm.

9.Bearings :HRB brand

10.Electronic components and accessories:SHINAIDE, DELIXI brand.

11.Pneumatic components.rotary joints,metal hose:YADEKE,TENGZHOU brand.

LUM-B 320 Fingerless type Single Facer

Structural features:

1.Apply vacuum adsorption for paper feeding,equipped with high-pressure powerful fan. Equipped with air conditioning machine air suction device;

2. Gimbal transmission, the body structure independent driver box. Enclosed gear transmission oil lubrication, can prolong the service life of gear.

3. Glue-coating roller and fixed rubber roller design for group guide sliding, disassembling conveniently.

4. Base and wallboard cast iron structure, wallboard thickness for 180mm.

5. Corrugated roller adopts 48CrMo high quality alloy steel, via piece.modified, quenching, surface polishing, corrugated roller diameter Ø 320mm, surface hardness for HRC60 degrees, Corrugated roller adopt cylinder controlled fluctuation displacement

6. Pressure roller diameter(Ø320mm),surface treatment processing and chromium plating,Cylinder controlled fluctuation,material for medium-carbon steel displacement 45, modulation handle.

7. Corrugated roller and pressure roller bearings use high-temperature grease lubricated bearing.

8. Pneumatic control glue feeding, glue roller diameter (Ø240mm), surface polishing and engraved net with then hard chromium plating, glue adjusting roller hard chromium plating and grinding.

9. Adopt electric glue separating device.

10. Corrugated roller unilateral high 0.10 mm, pressure roller unilateral 0.075 mm high. Plus limit device, pressure cylinder for Ø 1.6 mm cylinder.

Technical parameters:

• Work width:1800mm
• Design speed: 150 meters per minute.
• Operation direction: left or right (need according to customer's plant sure).
• Source: 0.4-0.9 Mpa.
• Steam pressure: 0.8-1.3 Mpa.
• Flute profile: according to the customer

Roller class diameter parameters:

1.Corrugated roller diameter Ø320 mm

2.Pressure roller diameter: Ø320 mm

3.Glue-coating roller diameter:Ø240 mm

4.Preheat roller diameter: Ø400 mm

5.Body thickness:180mm

Technical parameter:

LUM-C 380 Fingerless type Single Facer

1. Technical parameters:

2. Main structure features:

1. Vacuum adsorption to guide paper with a strong high-pressure turbine . With wind control device machine suction silencer ; electrical control cabinet to focus on the same host is not less than 1.5 m from the operating side of the closed side of the hood.

2. Gimble drive,with independent driver box.Enclosed gear oil immersion lubrication, extend the life of the gear.

3.Glue roller and glue roller are designed to groups guide way slippage,debug and conveniently;

Corrugated roller unit is designed with host machine separately,easy for lift outside and change other type flute roller.

4. Cast iron base and wall structure , wallboard thickness of 240mm.

5.Corrugated adopt 52CrMo high quality alloy steel,quenched and tempered, hardened,polished surface , Corrugated diameterØ380m, surface hardness HRC60 degrees;Corrugated controlled by cylinder displacement down .

6. Pressure roller diameter is Ø380m, surface grinding and chrome plating ; cylinder displacement control up and down , made Carbon steel 45 , the modulation process .

7. Preheating roller diameter is Ø400mm, surface grinding and hard chrome plating , all connected by a metal hose.

8.Corrugated roller and pressure roller with high temperature and pressure grease lubricated bearings.

9.Pneumatic control back to glue adhesive, glue roller diameter is Ø240mm, engraved with the pit -style textured back surface plated polished Chrome handle,transfer roller surface grinding and hard chrome plated .

10. Use of electric devices every pulp,coated paste run independently,when the host stopped,to prevent the paste dry.

11.Corrugated unilateral height is 0.10mm, high pressure roller unilateral is 0.075mm. Plus limit place device , compression cylinder is Ø160 mm cylinder.

12. Glue amount with electric adjustment digital glue,easy to operate.

13 In the machine,it’s fitted with foggy sprayer device for paper preheater.

3. Main related, raw material and origin:

4. Wearing parts and spare parts list:

Single Face Paper Corrugation Machine

Corrugated Board Manufacturing Machine

Single Face Paper Corrugation Machine For Corrugated Board Manufacturing Images